WI-196 Cleaning waste separator
|
|
Work instruction Number 196
|
Page 1 of 1
|
Purpose: Cleaning waste separator (Version 2)
|
Safety: Bio Hazard area
|
|
Instrument: Interrliner
|
Revision: 003, Dec. 2015
|
PDF-version
Removing
![17402 Remove waste separator](separatorout.jpg)
Cleaning
![s](separatorcleaning.jpg)
A. Clean all parts with hot water and a brush. B. Use some acid free vaseline on the screw-thread of the glass jar, the top rim of the glass jar, the O-ring for the HEPA filter and the black PVC pipe on the back.
Replacing
![17402 Replace waste separator](separatorin.jpg)
C. If applicable replace the bacterial HEPA filter (For Maintenance Level 4: Exchange filter QWLV040002)
|