Set protocol settings
The following protocols can be selected for out putting data;
- No Serial output.
- MECHATRONICS-01 Bidirectional
- MECHATRONICS-02 Unidirectional
- SE 9000.
- SE 9000 Unidirectional
- R-3500.
- R-3500 unidirectional.
- R-3500 EPU
- Compact unidirectional
When selected the following keys will pop-up.- Checksum On/Off.
- 30 Minute method On/Off.
- Ack/Nack On/Off.
- Compact Bidirectional.
When selected the following keys will pop-up.- Checksum On/Off.
- 30 Minute method On/Off.
- StaRRsed III (v14)
When selected the following keys will pop-up.- Checksum On/Off.
- 30 Minute method On/Off.
- Ack/Nack On/Off.
- Vesmatic
- Sedimatic 15
- Sedimatic 100
- OPUS
When selected the following keys will pop-up.- Checksum On/Off.
- 30 Minute method On/Off.
- Advia 120
- Advia 120 unidirectional
- InteRRliner
For more details see the Protocol Handbook.
Return to LIMS settings (LIMS settings, LIMS settings, LIMS settings, LIMS settings) screen
|