Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index
Needle Control

Fill nozzle Up Fill nozzle Down Rinse nozzle Up Rinse nozzle down Sampler probe down Sample probe Up Outer needle Down To History screen To Setting screen Needle control Display error history To Maintenance screen Advanced Pumps Manual control Serial output setting AutoCompact settings To Reagents status screen Valves and Actuators Service screen To Sample screen Rack unit setting Outer needle Up Load settings, Save settings as and Save settings led status of the fill nozzle and rinse nozzle close program

This function is only operational if the rack is in a fill position.

  1. Outer needle up: The Outer needle is send to the up home position.
  2. Outer needle down: The Outer needle is send to the down position.
  3. Sample probe up: The Sample probe is send to the up home position.
  4. Sample probe down: The Sample probe is send to the down position.
  5. Fill nozzle up: The Fill nozzle is send to the pipette position
  6. Fill nozzle down: The Fill nozzle is send to the fill nozzle home position.
  7. Rinse nozzle up: The Rinse nozzle is send up to the pipette.
  8. Rinse nozzle down: The Rinse nozzle is send to the rinse nozzle home position.

Led status display

  • Led status check for the fill- and rinse nozzle is displayed.

See Also

Manual control

Explain Pump control

Explain needle control

Explain Needle & Nozzle

Valve control

Explain valves and Actuators
To top of page Mechatronics home Send Feedback Print