FAQ: 14008

Symptom :

How to set-up the citrate mode on the Starrsed ST

Hint :

• You disconnect tube 3 from the needle and extend tube 3 with tube 31, connect the metal part of tube 31 to tube 3 and connect the other side to the needle.
• Insert an S-card (Password 3964) or an T-card (Password 4711) in the slot and go to menu
  7. Card & Credits -> 2. Read service card.
• Return to the main menu and press
  5. Settings ->7. Next ->2. EDTA mode
• Using the ˄ and ˅ key set the EDTA mode to OFF

Additional information :

Key words:

Citrate, tube 31, tube 3

Category:

Run mode