Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index
ESR unit settings

To Sample screen To History screen To reagent screen To Maintenance screen To General settings screen To Service screen To Rack unit Settings To LIMS Settings To ESR unit Settings To Manual control To Service errors To Advanced ESR unit connected to communication port Printer port Select barcode reader Outer needle depth Set Result path location Activate USB Device Example history ON/OFF Save and load settings

  • Load settings is used for reloading the stored software settings.
  • Save settings as is used for storing software settings to a file. There are no restrictions for the file name.
  • Save settings is used for storing software settings after settings are changed or altered.

See Also

Service screen

General / Barcode screen

LIMS settings

ESR unit settings

Manual control

Display error history (Service)

Display maintenance history (Service)
To top of page Mechatronics home Send Feedback Print