Model Flow sensor check using Starrsed main program
Switch instrument ON and select tab . During the aspiration sequence the airflow is monitored and the following values are shown on the display screen:
If for example the yellow orifice is blocked the Abs will be: Equivalent to the zero offsets. 0045- 0050- 0055. (Offset value)
![esri080938_flow_sensor_board](esri080938_flow_sensor_board.jpg)
Vacuum adjustment flow board 1
|
|
|
|
Flow: 0980 ± 60 Abs: 0320 ±10 Offset: 0050 ±5
|
|
Return to Flow sensor vacuum adjustment (Flow sensor vacuum adjustment, Flow sensor adjustment (KB))
|