Manual home Send Feedback Print | ||||||
Linked QC IDs
Use this screen to link the Starrsed Control sample ID with a Lab ID or to check which links are active.
If the Starrsed Control sample ID is not correct or the expiry date is exceeded, a message will be shown and the ID's are not added to the list. To remove a link that will no longer be used, select the link in the table and click on "Remove link". Depending on the optional setting "Automatically remove linked QC ID after result", (Settings - QC Settings) the links can be removed automatically when a usable ESR result has been reported for this particular Lab ID.
|
||||||
To top of page | Mechatronics home Send Feedback Print | |||||
|