Starrsed TL program

The Starrsed TL is controlled via an external computer on which runs the Starrsed TL software. The software functions are grouped on six tabbed screens. The software is controlled by mouse pointer or directly via the touch screen. A virtual keyboard is automatically displayed on screen, when numerical or alphanumerical input is required.

Normal operational screens are the Sample and the History screen.
The Reagents screen is used to check the reagent levels and log reagent replacement.
To activate priming sequences and cleaning operations, the screen Maintenance is used.
The Settings and Service screens are protected by a password to prevent accidental change of settings. The Service menu is used for service and control purposes.

Note: In the next sections move the mouse over the tab and click the left mouse button. Click again on the same tab for detailed information on the subject.

The settings and adjustments which can be changed and done in the service mode are only available for trained and qualified personnel.