Result Printout
The results of the ESR measurements can be send to the printer. The layout of the report depends on the selection of the 60- or 30 minute method.
Columns:
- Sample ID=Patient number.
- Hh=Not corrected 30-minute ESR result (only in use if 30 minute mode is active).
- ESR=Not corrected 60-minute ESR result.
- Tc=60-minute ESR result in millimeters, corrected for 18°C. (only in use if temperature correction is active).
- Aspect (clear, hazy).
- Pip.=Sedimentation pipette number (number on the pipette belt).
- Time=Actual sedimentation time in minutes.
- T=Temperature (in degrees Centigrade).
- Error=Error message (if the Analyzer detects an error).
- EDTA mode.
|