Manual home Send Feedback Print | ||||||
Data safety managementAll data in the Starrsed ST is stored in a battery backup memory. This means that all raw data and results are kept, irrespective of a power failure or if the instrument is un-intentionally turned off. After the start-up procedure the software checks whether there are any ESR's still outstanding. If so, these will be carried out first. After a power failure the sedimentation time (60 or 30 min.) may be exceeded. However, the start time is saved and therefore the actual sedimentation time can be checked. A limited amount of sample data can be stored, see Technical specifications.
|
||||||
To top of page | Mechatronics home Send Feedback Print | |||||
|