End-of-day-wash procedure

The purpose of this function is to clean the inside of the pipettes from residue which may have accumulated over time.
In the Main Menu use the function End_of_day wash. This function takes ca. 30 minutes to complete.

All pipettes are automatically filled with X-Clean. When the last pipette was filled, the pipettes are emptied again.

The function may be aborted by pressing the [ CANCEL ] key.

Loep

NOTE:
If the function was aborted, the X-Clean may not have had enough opportunity to soak and clean the pipettes.

End-of-day-wash procedure

See Also