Appendix - Article reference list Starrsed ST
The Starrsed ST is delivered with a complete accessories kit BANG119000. This reference list is for article order numbers only, the actual contents of the accessories kit may be changed without notice.
Since 01-01-2020 new ordering numbers are used by RR Mechtronics for all spare parts and consumables. The new ordering numbers are the part numbers, mentioned on the drawings, preceded with an "S" e.g. "ESRI010246" must be ordered as "SESRI010246". Only articles starting with "QRR" remain unchanged.
Part number
|
Ordering number
|
Description
|
BANG010041
|
SBANG010041
|
Drip plate, basic
|
BANG020003
|
SBANG020003
|
Plunger tip
|
BANG020023
|
SBANG020023
|
Starrsed ST service tool
|
BANG029004
|
SBANG029004
|
Starrsed ST Westergren pipette
|
BANG030052
|
SBANG030052
|
Pipette sealing ring
|
BANG049001
|
SBANG049001
|
Needle (for double needle version)
|
BANG049002
|
SBANG049002
|
Needle sealing block (for double needle version)
|
BANG040050
|
SBANG040050
|
Needle (for single needle version)
|
QWLV050080
|
SQWLV050080
|
O-ring for single needle version
|
BANG079008
|
SBANG079008
|
Tube 8
|
BANG110023
|
SBANG110023
|
Nozzle Calibration jig
|
BANG040031
|
SBANG040031
|
Drip plate, front
|
QEDK100002
|
SQEDK100002
|
Euro power cable angular 90º
|
QEDK130501
|
SQEDK130501
|
Serial Cable SUBD9 male female
|
QEDV130017
|
SQEDV130017
|
Fuse 1.6 A Slow (220V)
|
QEDV130019
|
SQEDV130019
|
Fuse 2.5 A Slow (115V)
|
QEPT080100
|
SQEPT080100
|
Thermal Roll 57 x 47 x 12 mm
|
QWBM050014
|
SQWBM050014
|
Retaining Washer Æ 1.5 (for pipettes)
|
QWFG010300
|
SQWFG010300
|
Tap for Reagents container
|
QWLV030901*
|
SQWLV030901*
|
Teflon tip repair set (1 ring)
|
QWLV040001
|
SQWLV040001
|
Disc filter 25mm (White) (for waste container)
|
QWLV050003
|
SQWLV050003
|
O-ring 1.5x1 (for fill nozzle and mixing coil)
|
QWLV050016
|
SQWLV050016
|
O-ring 2.9x1.78 (for fill nozzle)
|
BANG030096
|
SBANG030096
|
Printer paper tray
|
QWLV090011
|
SQWLV090011
|
Tube for peristaltic pump
|
QRR 010931
|
QRR 010931
|
Starrsed Diluent
|
QRR 010946
|
QRR 010946
|
Starrsed X- Clean
|
BANG31256Q
|
SBANG31256Q
|
Mechatronics Instruments chip card Q
|
BANG31256S
|
SBANG31256S
|
Mechatronics Instruments chip card S
|
QWLV080002
|
SQWLV080002
|
Quad ring 3.68 x 1.78 (for valves)
|
A0026577
|
A0026577
|
Starrsed Control level N (blister with 6 tubes)
|
A0026578
|
A0026578
|
Starrsed Control level A (blister with 6 tubes)
|
*Only applicable for Diluter syringe QWLV030009, Diluter syringe QWLV030021 has to be replaced after 2 years
|