Function
Description
At home position
LED is lit when CUP is at home position (= fixed position along cup circumference where back-scatter intensity is acquired)
Intensity (au)
Back-scatter intensity (arbitrary units), should be within the range [0, 100] au during measurements (when blood is inserted).
BOB temperature
Current BOB temperature in degrees Centigrade
Run motor at (rps)
Motor control. Set to desired cup revolution speed (rps = revolutions per second).
During this test, the laser is turned on (flash) in order to enable back-scatter intensity measurements.
Checking LoRRca functionality
LoRRca IO
Camera