Perform FSAR procedure

Checkbox, to include the FSAR procedure in the aggregation measurement. The FSAR measurement is performed immediately following the iteration procedure. Note: The acquisition of the backscatter intensity during the FSAR measurement is similar to that during the iteration procedure (one sample per cup revolution). Acquisition parameters of the iteration procedure (Samples per shear rate, Maximum deviation, Iteration timeout) also apply to the FSAR measurement.

-

Low shear rate (1/s)

Low shear rate for determining FSARIscglow/I0. The low shear rate is taken 10/s by default.

[1, 2500] /s