Explain LoRRca Status
Function
|
Description
|
At home position
|
The LED is lit when cup is at home position (= fixed position along cup circumference where back-scatter intensity is acquired)
|
Intensity (au)
|
Back-scatter intensity (arbitrary units), should be within the range [0, 100] au during measurements (when blood is inserted).
|
BOB temperature
|
Current BOB temperature in degrees Centigrade
|
Run motor at (rps)
|
Motor control. Set to desired cup revolution speed (rps = revolutions per second).
|
Note: During this test, the laser is turned on (flash) in order to enable back-scatter intensity measurements.
Return to Hardware check status.
|