Mechatronics home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Explain LoRRca IO

Function

Description

Laser state

Control to select one of the following laser states:

  1. On, continuous,
  2. On, Flash (Modulated),
  3. Off.

Motor mode

Control to select one of the following motor modes:

  1. Run until in home position,
  2. Run continuous. If in the home position, the motor can be re-activated by changing any of the other motor parameters.

Run motor at (rps)

Sets motor revolution speed

Valves

With toggling ON/OFF the functioning of the pinch valves can be checked (each valve should give a "click")

Return to Hardware check IO screen

See Also

Hardware check IO screen
To top of page Mechatronics home Send Feedback Print