Mechatronics home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Intended use

The LoRRca MaxSis is intended for the following measurements on human and veterinary blood samples:

  • Red Blood Cell Deformability
    • Laser diffraction ektacytometry
    • Relaxation rate
    • Parametrization of deformation curve
    • Cell Stability test
    • Cell Membrane Stability
  • Red Blood Cell Deformability under various osmotic conditions (Osmoscan)
    • Osmotic resistance
  • Red Blood Cell Aggregation
    • Cell aggregation (kinetics, tendency)
    • Syllectometry (back-scatter)

Disclaimers:

Until otherwise labelled, the LoRRca MaxSis is NOT released by the manufacturer as an in-vitro diagnostic medical device (IVD).

Until otherwise published, the LoRRca MaxSis is NOT validated by the manufacturer for any diagnostic or therapeutic purposes.

The manufacturer does not accept liability for any consequences arising from the use of the LoRRca MaxSis for diagnostic and therapeutic purposes.

Note:

The manufacturer encourages researches who have developed or investigated any possible diagnostic or therapeutic applications for the LoRRca MaxSis, to contact the manufacturer in order to establish and validate the LoRRca MaxSis as an IVD for these applications.

See Also

Introduction Lorrcaź MaxSis Osmoscan

Features of the LoRRca MaxSis

Symbols

General measurements description

To top of page Mechatronics home Send Feedback Print