Mechatronics home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index

Basics of Bio safety

Basic rules on bio safety in a laboratory;

  • Wash hands after handling biological materials, removing gloves, or before leaving work area.
  • Don't eat, drink, etc. in the work area.
  • Never mouth pipette.
  • Take extreme precautions when sharps must be used. Dispose sharps carefully and properly.
  • Conduct procedures likely to create splashes, sprays, or aerosols within a biological safety cabinet that is certified annually.
  • Decontaminate work surfaces at least daily.
  • Decontaminate waste materials before disposal.
  • Wear a BUTTONED lab coat to protect street clothes.
  • Wear gloves when hands may contact potentially infectious materials, contaminated surfaces, or equipment.
  • Wear eye/face protection if splashes or sprays are anticipated during work outside a biological safety cabinet.
  • Transport materials outside of the laboratory using secondary containment and a cart. Avoid public areas during transport.
  • Transfer materials to and from the MCG according to federal and international regulations.
  • Be familiar with written instructions for laboratory procedures and proper responses to emergencies.
  • Report spills, exposures, illnesses, and injuries immediately.

See Also

Standard Operating Procedures (S.O.P.)

S.O.P. for working with bio hazardous materials

To top of page Mechatronics home Send Feedback Print