ESR Error and Warning code messages

ESR Error and Warning code messages

ESR "ERROR" and "WARNING" code messages. This code appears in the "sample data record" at column 10.
Error: No ESR result is given
Warning: Result should be reviewed before release.

The following codes are defined:

0	No errors
1	No cells/plasma found	Error	No contents could be detected in the pipette.
2	ESR Probably > 140 mm	Error	Extremely high ESR value.
3	Too many borders found	Error	More than three borders found, possibly air bubbles. See Section Troubleshooting Air bubbles.
4	Column height <nnn>	Warning	Column height must be between 180 and 210mm. <nnn> = the actual column height.
5	Measure error	Warning	The down count is not equal to the up count from the measure head.
6	Bubbles on top	Warning	Air bubbles on top of the ESR. See Section Troubleshooting Air bubbles.
7	Limit error	Error	One of the following limits are out of the setting range: ESR Time Column height Dilution Bubbles on top Hazy aspect Temperature

See Also