Manual home Send Feedback Print | ||||||
Main power connectionsThe main switch for the ESR analyzer unit is located at the left side of this instrument. Attention: The sample robot unit is powered by the ESR analyzers power supply. Switching the transport units OFF will not switch OFF the sample robot! A central power distribution block to connect all units and auxiliary devices to is located at one of the rear support legs near the Start-pool. This distribution block has a main switch and an indicator light showing the status ON or OFF. Check if all the power cables from the ESR analyzer unit(s) and printer(s) are connected to the distribution block. Note: Do not switch the Interrliner OFF during normal operation!
|
||||||
To top of page | Mechatronics home Send Feedback Print | |||||
|