Pipette information

The following information is shown:

• Sample ID:
  The sample identification (barcode) of the sample tube.
• Dilution:
  The dilution rate of this sample as calculated during the aspiration process.
• Time filled:
  The date and time when the sample was aspirated.
• Time to go:
  The number of minutes to wait until the sample will be measured.

The indicators at the right side show the current status of the selected pipette:

• Pipette filled OK:
  A sample has been aspirated into the pipette without problems.
• Pipette dirty:
  The sample has been measured and the pipette is marked to be washed when it reaches the rinse station. This indicator is also on when a sample could not be aspirated properly.