Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index
Pipette information

Main screen with pipette information

Pipette belt, double click on pipette for detail information pipette Pipette belt, double click on pipette for detail information pipette To Maintenance screen To History screen To Service screen Pipett number 15 Measure station Pipette number 38 Rinse station Fill station Pipette belt, double click on pipette for detail information pipette To Reagents status screen To Setting screen Sample screen Pipette Sample rack Start buton Version number Status line Manual input sample ID Sample information Piette information on the selected pipette. Close program

The following information is shown:

  • Sample ID:
    The sample identification (barcode) of the sample tube.
  • Dilution:
    The dilution rate of this sample as calculated during the aspiration process.
  • Time filled:
    The date and time when the sample was aspirated.
  • Time to go:
    The number of minutes to wait until the sample will be measured.

The indicators at the right side show the current status of the selected pipette:

  • Pipette filled OK:
    A sample has been aspirated into the pipette without problems.
  • Pipette dirty:
    The sample has been measured and the pipette is marked to be washed when it reaches the rinse station. This indicator is also on when a sample could not be aspirated properly.

See Also

Sample screen

Sample screen sections explanation

Carousel:

Measure station:

Wash station:

Fill station:

Pipette:

Rack:

Sample mode button:

Version information:

Sample information:

Status:

Sample screen with keyboard
To top of page Mechatronics home Send Feedback Print