Manual home Send Feedback Print

Previous Topic

Next Topic

Book Contents

Book Index
Pipette flow tests

Pipette flow test

Warning: Pipettes must be empty, before starting this function.

Before the confirmation of the function the warning < Pipette data will be lost! > is displayed.
This test is a useful function for checking the pipette position adjustment, vacuum adjustment and filling height adjustment.
Each individual pipette is tested and results are displayed in their own line of the diagram.

Pipette flow test (start page) Click on button Click on button Click on button Click on button Click on button Click on button Press to start the flow test Press exit to return to main screen

Potentiometer mean test:

Pipette flow test (start page) Click on button Click on button Click on button Click on button Click on button Click on button Press to start the flow test Press exit to return to main screen

Flow:

Pipette flow test (start page) Click on button Click on button Click on button Click on button Click on button Click on button Press to start the flow test Press exit to return to main screen

Absolute flow test:

Pipette flow test (start page) Click on button Click on button Click on button Click on button Click on button Click on button Press to start the flow test Press exit to return to main screen

Leakage test:

Pipette flow test (start page) Click on button Click on button Click on button Click on button Click on button Click on button Press to start the flow test Press exit to return to main screen

Fillsensor air flow test:

Pipette flow test (start page) Click on button Click on button Click on button Click on button Click on button Click on button Press to start the flow test Press exit to return to main screen

Fillsensor glass flow test:

Pipette flow test (start page) Click on button Click on button Click on button Click on button Click on button Click on button Press to start the flow test Press exit to return to main screen

See Also

Carousel control

Carousel control

Set new rinse position
To top of page Mechatronics home Send Feedback Print